top of page

Senza FASTENERS under TS16949, ISO9001 uhlelo lokuphatha ikhwalithi ngokuya ngezindinganiso zamazwe ngamazwe, i-SAIL DINE, i-SAIL i-M. Zonke izinsimbi zethu zithunyelwa kanye nezitifiketi zempahla nemibiko yokuhlola. Sihlinzeka ngezinto zokubopha ngaphandle kweshalofu kanye nezinsimbi zokukhiqiza ngokwezifiso ngokwemidwebo yakho yobuchwepheshe uma kwenzeka udinga okuthile okuhlukile noma okukhethekile. Sihlinzeka ngezinsizakalo zobunjiniyela ekuklameni nasekuthuthukiseni izibophelelo ezikhethekile zezinhlelo zakho zokusebenza. Ezinye izinhlobo ezinkulu zezinsimbi esizinikezayo yilezi:

 

• Izikhonkwane

 

• Amabhawudi

 

• Izingxenyekazi zekhompuyutha

 

• Izinzipho

 

• Amantongomane

 

• Phina Izibophelelo

 

• Ama-Rivets

 

• Izinduku

 

• Izikulufu

 

• Iziqinisekiso Zokuvikela

 

• Setha Izikulufo

 

• Amasokhethi

 

• Iziphethu

 

• Ama-Struts, ama-Clamps, nama-Hangers

• Amawasha

 

• Ama-Weld Fasteners

 

- CHOFOZA LAPHA ukuze ulande ikhathalogi yamantongomane e-rivet, i-rivet eyimpumputhe, faka amantongomane, ama-locknuts enayiloni, amantongomane ashiselwe, amantongomane e-flange

- CHOFOZA LAPHA ukuze ulande ulwazi olwengeziwe-1 ngamantongomane e-rivet

- CHOFOZA LAPHA ukuze ulande ulwazi olwengeziwe-2 ngamantongomane e-rivet

- CHOFOZA LAPHA ukuze ulande ikhathalogi yamabhawodi ethu e-titanium namantongomane

 

- CHOFOZA LAPHA ukuze ulande ikhathalogi yethu equkethe izixhumi ezidumile ezingekho eshalofini nezingxenyekazi zekhompuyutha ezifanele imboni yezogesi namakhompyutha.

Eyethu THREADED FASTENERS ingafakwa ngaphakathi nangaphandle futhi eze ngezindlela ezahlukahlukene kufaka phakathi:

 

- ISO Metric Screw Thread

 

- ACME

 

- I-American National Screw Thread (Ama-Inch Sizes)

 

- Intambo Kazwelonke YeScrew Ehlanganisiwe (Amasayizi Amayintshi)

 

- Isibungu

 

- Isikwele

 

- Iqupha

 

- Buttress

 

Izibophelelo zethu ezinentambo ziyatholakala Ngemiluko Yesandla Sesokudla kanye Nesobunxele kanye Nemicu Eyodwa Futhi Eminingi. Kokubili I-Inch Threads kanye ne-Metric Threads kuyatholakala kuma-fasteners. Kumakilasi e-Inch threaded fastened intambo yangaphandle 1A, 2A kanye ne-3A kanye namakilasi entambo yangaphakathi ye-1B, 2B kanye ne-3B ayatholakala. Lezi zigaba zama-inch thread ziyahlukahluka ngenani lezibonelelo nokubekezelelana.

Amakilasi 1A no-1B: Lezi zibophelelo zikhiqiza ukulingana okuxekethile ekuhlanganiseni. Asetshenziswa lapho kulula ukuhlanganisa nokuhlakazeka njengamabhawudi esitofu namanye amabhawodi namantongomane.

Amakilasi 2A kanye no-2B: Lezi zibophelelo zifanele imikhiqizo evamile yokuthengisa nezingxenye ezishintshashintshayo. Izikulufu ezijwayelekile zomshini nezinsimbi ziyizibonelo.

Amakilasi 3A kanye no-3B: Lezi zibophelelo zenzelwe imikhiqizo yokuthengisa yezinga eliphezulu kakhulu lapho kudingeka khona ukulingana okuseduze. Izindleko zokubopha ezinezintambo kuleli klasi ziphezulu.

Kuma-fastened ane-metric threaded sinomucu omahhadlahhadla, uchungechunge oluhle kanye nochungechunge lwamaphimbo angaguquki atholakalayo.

I-Coarse-Thread Series: Lolu chungechunge lwezixhumi luhloselwe ukusetshenziswa emsebenzini wobunjiniyela ojwayelekile nasezinhlelweni zentengiso.

Uchungechunge lwe-Fine-Thread: Lolu chungechunge lwezibophelelo olokusetshenziswa okuvamile lapho kudingeka khona umucu ocolekile kunomucu omahhadla. Uma siqhathaniswa nesikulufu somucu omahhadla, isikulufu somucu ocolekile sinamandla kukho kokubili amandla aqinile nanyakazayo futhi mancane amathuba okuthi sikhululeke ngaphansi kokudlidliza.

 

Mayelana nokuphakama kwe-fasteners kanye nobubanzi be-crest, sinenombolo yamabanga okubekezelela kanye nezikhundla zokubekezelela ezitholakalayo.

I-PIPE THREADS: Ngaphandle kwezixhumi, singakwazi umshini amapayipi ngokuya ngesihloko esinikezwe nguwe. Qiniseka ukuthi ubiza usayizi wentambo kumapulani akho obuchwepheshe wamapayipi angokwezifiso.

IMIHLANGANO ENEMICHULE: Uma usinikeza imidwebo yomhlangano ecushiwe singasebenzisa imishini yethu yokwenza izibophelelo zomshini womhlangano wakho. Uma ungajwayele izethulo zentambo yesikulufu, singakulungiselela amapulani.

 

UKUKHETHWA KWEZIQINISEKISO: Ukukhethwa komkhiqizo kufanele kuqale kahle esigabeni sokuklama. Sicela unqume izinjongo zomsebenzi wakho wokuqinisa futhi uxhumane nathi. Ochwepheshe bethu bezinsimbi bazobuyekeza izinjongo nezimo zakho futhi bancome izixhumi ezifanele ngezindleko ezingcono kakhulu zasendaweni. Ukuze uthole ukusebenza kahle okuphezulu komshini-isikulufu, ulwazi olunzulu lwezakhiwo zazo zombili izikulufu nezinto eziboshiwe ziyadingeka. Ochwepheshe bethu bezinsimbi banalolu lwazi ukuze bakusize. Sizodinga kuwe okokufaka okuthile okufana nemithwalo izikulufi nezixhumi okufanele zimelane nazo, kungakhathaliseki ukuthi umthwalo wezinto zokubopha nezikulufi ungowokushuba noma wokugunda, nokuthi ingabe ukuhlanganisa okuboshiwe kuzobhekana nokushaqeka noma ukudlidliza. Kuye ngazo zonke lezi nezinye izici ezifana nokuhlanganisa kalula, izindleko….njll., usayizi onconyiwe, amandla, ukuma kwekhanda, uhlobo lwentambo yezikulufu nezinsimbi zizohlongozwa kuwe. Phakathi kwezibophelelo zethu ezivame kakhulu ezinentambo kukhona SCREWS, BOLTS kanye nama-STUDS.

IZIKURUKO ZOMSHINI: Lezi zibophelelo zinemicu emihle noma emahholo futhi zitholakala ngamakhanda ahlukahlukene. Izikulufu zomshini zingasetshenziswa emigodini echotshoziwe noma ngamantongomane.

CAP SCREWS: Lezi izibophelelo ezinentambo ezihlanganisa izingxenye ezimbili noma ngaphezulu ngokudlula embotsheni yokukhipha ingxenye ethile bese zifinyila embobeni ecishiwe kwenye. Izikulufu ze-cap nazo ziyatholakala ngezinhlobo ezahlukene zamakhanda.

IZIKRILU EZITHUMILE: Lezi zibophelelo zihlala zinamathele kuphaneli noma ezintweni zomzali ngisho nalapho ingxenye yokukhwelana inqanyuliwe. Izikulufu ezibanjiwe zihlangabezana nezidingo zempi, ukuvimbela izikulufu ukuthi zingalahleki, ukunika amandla ukuhlanganisa / ukuqaqa ngokushesha futhi kunqande umonakalo ovela kuzikulufu ezixegayo eziwela ezingxenyeni ezihambayo namasekhethi kagesi.

UKUTHEPHA IZIKULI: Lezi zibophelelo zisika noma zenze intambo yokukhwelana uma ishayelwa emigodini eyakhiwe ngaphambilini. Izikulufu zokucofa zivumela ukufakwa ngokushesha, ngoba amantongomane awasetshenziswa futhi ukufinyelela kuyadingeka ohlangothini olulodwa kuphela lwelunga. Intambo yokukhwelana ekhiqizwa isikulufu sokucofa ilingana eduze nemicu yesikulufu, futhi akukho mvume edingekayo. Ukulingana okuseduze kuvame ukugcina izikulufu ziqinile, nanoma ukudlidliza kukhona. Izikulufu zokuzibhoboza zokuzibamba zinamaphuzu akhethekile okubhoboza bese zicofa izimbobo zazo. Akukho ukubhoboza noma ukubhoboza okudingekayo kuzikulufu zokuzibhoboza. Izikulufo zokuthepha zisetshenziswa ensimbi, i-aluminium (i-cast, extruded, rolling noma i-die-formed) i-die castings, insimbi ecijile, ama-forging, amapulasitiki, amapulasitiki aqinisiwe, i-plywood efakwe inhlaka nezinye izinto.

I-BOLTS: Lezi izibophelelo ezinentambo ezidlula emigodini yokuvula ezingxenyeni ezihlanganisiwe kanye nentambo ibe amantongomane.

STUDS: Lezi zibophelelo zingama-shaft afakwe emikhawulweni yomibili futhi asetshenziswa emibuthanweni. Izinhlobo ezimbili ezinkulu zama-stud ama-double end stud kanye ne-continuous stud. Ngokuqondene namanye ama-fasteners, kubalulekile ukunquma ukuthi yiluphi uhlobo lwebanga nokuqeda (i-plating noma ukugqoka) okufanele kakhulu.

NUTS: Kokubili amantongomane esitayela-1 kanye nesitayela-2 ayatholakala. Lezi zinsimbi zisetshenziswa ngokujwayelekile ngama-bolts nama-stud. Amantongomane e-Hex, amantongomane ane-hex-flanged, amantongomane ane-hex-slotted adumile. Kukhona futhi ukuhluka phakathi kwala maqembu.

WASHERS: Lezi zibophelelo zenza imisebenzi eminingi eyahlukene kuma-asembly aboshelwe ngomshini. Imisebenzi yamawasha ingaba ukunweba imbobo yokukhipha usayizi omkhulu, ukunikeza amantongomane nobuso ngezikulufu amandla angcono, ukusabalalisa imithwalo ezindaweni ezinkulu, ukusebenza njengamathuluzi okukhiya ama-fasteners anentambo, ukugcina ingcindezi yokumelana nentwasahlobo, izindawo ezigadayo ezimelene nokuwohloka, ukunikeza umsebenzi wokuvala nokunye okuningi. . Izinhlobo eziningi zalezi zibophelelo ziyatholakala njengamawasha ayisicaba, amawasha ayindilinga, amawasha asentwasahlobo ane-helical, izinhlobo zokukhiya amazinyo, iziwasha zasentwasahlobo, izinhlobo zezinjongo ezikhethekile...njll.

I-SETSCREWS: Lezi zisetshenziswa njengezibophelelo ezihlala kancane ukuze zibambe ikhola, i-sheave, noma igiya ku-shaft ngokumelene namandla ajikelezayo nawokuhumusha. Lezi zinsimbi ngokuyisisekelo zingamadivayisi okucindezela. Abasebenzisi kufanele bathole inhlanganisela engcono kakhulu yefomu le-setscrew, usayizi, nesitayela sephoyinti esinikeza amandla okubamba adingekayo. Ama-Setscrews ahlukaniswa ngesitayela sawo sekhanda nesitayela sephoyinti esifiswayo.

LOCKNUTS: Lezi zibophelelo zingamantongomane anezindlela ezikhethekile zangaphakathi zokubamba izibophelelo ezinentambo ukuvimbela ukuzungezisa. Singabuka ama-locknuts njengamantongomane ajwayelekile, kodwa ngesici sokukhiya esingeziwe. Ama-Locknuts anezindawo eziningi zokusetshenziswa eziwusizo kakhulu okuhlanganisa ukuqiniswa kwe-tubular, ukusetshenziswa kwama-locknuts kuma-clamp entwasahlobo, ukusetshenziswa kwe-locknut lapho ukuhlanganiswa kungaphansi kokudlidliza noma ukunyakaza kwama-cyclic okungadala ukuxegiswa, kokuxhumeka okufakwe entwasahlobo lapho nati kufanele lihlale limile noma lingaphansi kokulungiswa. .

AMANONGOTHI ATHUBILE NOMA AZIGCINELE: Leli klasi lezixhumi lihlinzeka ngokubopha okungapheli, okuqinile, okunentambo eminingi ezintweni ezizacile. Amantongomane abanjiwe noma azibambele mahle ikakhulukazi uma kunezindawo eziyimpumputhe, futhi anganamathiselwa ngaphandle kokulimaza.

INSERTS: Lezi zibophelelo zingamantongomane amafomu akhethekile aklanyelwe ukwenza umsebenzi wembobo ecindezelwe ezindaweni ezingaboni noma ezingenamgodi. Izinhlobo ezahlukene ziyatholakala njengokufakwa okubunjiwe, okuzifakayo ozithephayo, okufakwe ngaphandle kwentambo yangaphakathi, okufakwe ngokucindezelwe, okufakwayo okuncanyana.

IZIQINISEKISO ZOKUGCINA: Lesi sigaba sezibophelelo aligcini nje ngokubamba izingxenye ezimbili noma ngaphezulu ndawonye, kodwa ngasikhathi sinye zinganikeza umsebenzi wokuvala amagesi noketshezi ngokumelene nokuvuza. Sinikeza izinhlobo eziningi zezinsimbi zokuvala kanye nezakhiwo ezihlanganisiwe eziklanywe ngokwezifiso. Eminye imikhiqizo edumile izikulufu zokuvala, ama-rivets okuvalwa, amantongomane okuvala namawasha okuvala.

I-RIVETS: Riveting iyindlela yokubopha esheshayo, elula, eguquguqukayo neyongayo. Ama-Rivets abhekwa njengezibophelelo ezihlala njalo ngokungafani nezibophelelo ezikhiphekayo njengezikulufu namabhawodi. Ngokuchazwa kalula, ama-rivets angamaphini ensimbi e-ductile afakwa ngezimbobo ezingxenyeni ezimbili noma ngaphezulu futhi aneziphetho ezakhiwe ukuze zibambe ngokuvikelekile izingxenye. Njengoba ama-rivets eyizixhumi ezihlala unomphela, izingxenye ezicijile azikwazi ukuhlakazwa ukuze zilungiswe noma zishintshwe ngaphandle kokungqongqoza i-rivet ngaphandle futhi kufakwe entsha endaweni ukuze ihlanganiswe kabusha. Uhlobo lwama-rivets atholakalayo ama-rivets amakhulu namancane, ama-rivets wemishini ye-aerospace, ama-rivets ayimpumputhe. Njengazo zonke izinto zokubopha esizithengisayo, siyawasiza amakhasimende ethu ekwakhiweni nasekukhetheni umkhiqizo. Kusukela ohlotsheni lwe-rivet olufanele isicelo sakho, ukuya ejubaneni lokufakwa, izindleko zasendaweni, isikhala, ubude, ibanga eliwunqenqema nokunye, siyakwazi ukukusiza ohlelweni lwakho lokuklama.

Ikhodi Yereferensi: OICASRET-GLOBAL, OICASTICDM

bottom of page